Account

Vous n'êtes actuellement pas encore connecté.

Identifiant
  • ExpĂ©dition en Europe
  • Paiement sĂ©curisĂ©
  • SituĂ© au cĹ“ur de l'Europe, Belgique
  • DĂ©couvrez et testez au centre d' expĂ©rience
Filtre
0
Illimité

SimXPro

SimXPro
SimXpro is always on demand, delivery time is around 3-4 working days after ordering.


Affichage :


Chargement...
SimXPro® X80 - Black coating
î şî şî şî şî ş (0)
Sur commande
SimXPro® X80 - Black coating

SimXPro® X80 - Black coating

î şî şî şî şî ş (0)
€ 399,00

SimXPro® X80 - Black coating

V2 - UPGRADE (5 Feb. 2022)

The X80 got updated with thicker brackets and extra connectors to stay ahead and be the strongest 4080 rig in the market!

The X80 is constructed with 4080 aluminum extrusion profiles. Not all aluminum profiles in the market are the same. There is a lot of difference in the quality and density of the profiles. SimXPro uses european, high quality profiles. The X80 can hold a DD.

Base frame dimensions: Ca. 1250x600x800mm

Weight: 32 KG

Basic package contains (without options)

Aluminium profiles:

2x 1200 mm - 4080 profiles

2x 750 mm - 4080 profiles

1x 580 mm - 4080 profile

2x 500 mm - 4080 profiles

2x 500 mm - 4040 profiles

Optional: Profiles for shifter mounting point 

Universal wheeldeck, standard pedal tray, corner brackets,  bolts, nuts, t-nuts and washers for mounting the rig. End caps for all visible profiles, cover caps for all visible nuts. English building instructions.

T-nuts and slides:

Our profiles have slots all around. Where possible, we have provided our brackets with slides instead of holes. This means you are not stuck with one fixed setup and you can adjust everything to your own preferences.

Assembling the X80:

The X80 must be assembled with 2 people. The X80 is the easiest rig to assemble. The mounting instructions are clear. Because there are so many possibilities with our system, a little technical insight is needed. The most important thing to prevent flex is to tighten everything properly.


What is included:
· Universal wheel deck (HS)
· Standard pedal tray (HS)
· Rubber dampers
· Mounting brackets (HS & Alu)
· Black bolts. Nuts and t-nuts with ball spring
· End caps for all visible profiles, cover caps for all visible nuts
· English step-by-step building instructions.
(HS = Hardened steel)

*For the X80 we had a lot of requests to order it without the shifter profiles.
This is the only rig where these profiles are not standard included.

SimXPro® X80 - Silver
î şî şî şî şî ş (0)
Sur commande
SimXPro® X80 - Silver

SimXPro® X80 - Silver

î şî şî şî şî ş (0)
€ 379,00

SimXPro® X80 - Silver

V2 - UPGRADE (5 Feb. 2022)

The X80 got updated with thicker brackets and extra connectors to stay ahead and be the strongest 4080 rig in the market!

The X80 is constructed with 4080 aluminum extrusion profiles. Not all aluminum profiles in the market are the same. There is a lot of difference in the quality and density of the profiles. SimXPro uses european, high quality profiles. The X80 can hold a DD.

Base frame dimensions: Ca. 1250x600x800mm

Weight: 32 KG

Basic package contains (without options)

Aluminium profiles:

2x 1200 mm - 4080 profiles

2x 750 mm - 4080 profiles

1x 580 mm - 4080 profile

2x 500 mm - 4080 profiles

2x 500 mm - 4040 profiles

Optional: Profiles for shifter mounting point 

Universal wheeldeck, standard pedal tray, corner brackets,  bolts, nuts, t-nuts and washers for mounting the rig. End caps for all visible profiles, cover caps for all visible nuts. English building instructions.

T-nuts and slides:

Our profiles have slots all around. Where possible, we have provided our brackets with slides instead of holes. This means you are not stuck with one fixed setup and you can adjust everything to your own preferences.

Assembling the X80:

The X80 must be assembled with 2 people. The X80 is the easiest rig to assemble. The mounting instructions are clear. Because there are so many possibilities with our system, a little technical insight is needed. The most important thing to prevent flex is to tighten everything properly.


What is included:
· Universal wheel deck (HS)
· Standard pedal tray (HS)
· Rubber dampers
· Mounting brackets (HS & Alu)
· Black bolts. Nuts and t-nuts with ball spring
· End caps for all visible profiles, cover caps for all visible nuts
· English step-by-step building instructions.
(HS = Hardened steel)

*For the X80 we had a lot of requests to order it without the shifter profiles.
This is the only rig where these profiles are not standard included.

SimXPro® XT120 - Black coating
î şî şî şî şî ş (0)
Sur commande
SimXPro® XT120 - Black coating

SimXPro® XT120 - Black coating

î şî şî şî şî ş (0)
€ 629,00

SimXPro® XT120 - Black coating

The XT120 is a good choice for the sim racer who wants to get more out of there rigs in terms of strength and adjustability. Expanding and upgrading is very easy because all our parts can be used with all our profiles. You are not tied to one model or a fixed setup. The XT120 is our high end model with shifter mount and (front) wheel mount of choice. You can also choose if you want to have the uprights connected with our steel corner brackets our Aluminium T-connect plates.The XT120 can hold the forces of every Direct Drive.

Base frame dimensions: Ca. 1350x660x820mm

Weight: 52 KG

Basic package contains (without options)

Aluminium profiles:

2x 1300 mm - 40120 profiles

2x 800 mm - 40120 profiles

2x 500 mm - 40120 profiles

2x 500 mm - 4040 profiles

1x 580 mm - 4080 profile

1x 340 mm - 4040 profile 

*Profiles for shifter mounting point included.

**Universal seat brackets are optional.

What is included:

· SimXPro® Flat or front wheel mount

· SimXPro® Adjustable feet brackets

· Standard pedal tray

· Shifter profile mounting point

· Rubber dampers

· Mounting brackets

· Black bolts. Nuts and t-nuts with ball spring

· End caps for all visible profiles, cover caps for all visible nuts

· English step-by-step building instructions.

What is optional:

· SimXPro® Profile pedal deck (upgrade)

T-nuts and slides:

Our profiles have slots all around. Where possible, we have provided our brackets with slides instead of holes. This means you are not stuck with one fixed setup and you can adjust everything to your own preferences.

Assembling the XT120:

The XT120 must be assembled with 2 people. The XT120  is not very difficult to assemble. The mounting instructions are clear. Because there are so many possibilities with our system, a little technical insight is needed. The most important thing to prevent flex is to tighten everything properly.

SimXPro® XT120 - Silver
î şî şî şî şî ş (0)
Sur commande
SimXPro® XT120 - Silver

SimXPro® XT120 - Silver

î şî şî şî şî ş (0)
€ 579,00

SimXPro® XT120 - Silver

The XT120 is a good choice for the sim racer who wants to get more out of there rigs in terms of strength and adjustability. Expanding and upgrading is very easy because all our parts can be used with all our profiles. You are not tied to one model or a fixed setup. The XT120 is our high end model with shifter mount and (front) wheel mount of choice. You can also choose if you want to have the uprights connected with our steel corner brackets our Aluminium T-connect plates.The XT120 can hold the forces of every Direct Drive.

Base frame dimensions: Ca. 1350x660x820mm

Weight: 52 KG

Basic package contains (without options)

Aluminium profiles:

2x 1300 mm - 40120 profiles

2x 800 mm - 40120 profiles

2x 500 mm - 40120 profiles

2x 500 mm - 4040 profiles

1x 580 mm - 4080 profile

1x 340 mm - 4040 profile 

*Profiles for shifter mounting point included.

**Universal seat brackets are optional.

What is included:

· SimXPro® Flat or front wheel mount

· SimXPro® Adjustable feet brackets

· Standard pedal tray

· Shifter profile mounting point

· Rubber dampers

· Mounting brackets

· Black bolts. Nuts and t-nuts with ball spring

· End caps for all visible profiles, cover caps for all visible nuts

· English step-by-step building instructions.

What is optional:

· SimXPro® Profile pedal deck (upgrade)

T-nuts and slides:

Our profiles have slots all around. Where possible, we have provided our brackets with slides instead of holes. This means you are not stuck with one fixed setup and you can adjust everything to your own preferences.

Assembling the XT120:

The XT120 must be assembled with 2 people. The XT120  is not very difficult to assemble. The mounting instructions are clear. Because there are so many possibilities with our system, a little technical insight is needed. The most important thing to prevent flex is to tighten everything properly.

SimXPro® XT160 - Black coating
î şî şî şî şî ş (0)
Sur commande
SimXPro® XT160 - Black coating

SimXPro® XT160 - Black coating

î şî şî şî şî ş (0)
€ 799,00

SimXPro® XT160 - Black coating

The XT160 is the best choice for the sim racer who wants to get the most out of there rigs in terms of strength and adjustability. Expanding and upgrading is very easy because all our parts can be used with all our profiles. You are not tied to one model or a fixed setup. The XT160 is our high end top model with shifter mount and (front) wheel mount of choice. You can also choose if you want to have the uprights connected with our steel corner brackets our Aluminium T-connect plates. The XT160 can hold the forces of every Direct Drive and motion set.

Base frame dimensions: Ca. 1350x660x820mm

Weight: ca. 60kg

Basic package contains (without options)

2x 1300 mm - 40160 profiles

2x 500 mm - 40160 profiles

2x 800 mm - 40120 profiles

1x 580 mm - 4080 profile

2x 500 mm - 4040 profiles

1x 340 mm - 4040 profile

*Profiles for shifter mounting point included.

**Extended profile pedal deck is included.

What is included:

· SimXPro® Flat or front wheel mount

· SimXPro® Adjustable feet brackets

· SimXPro® Extended pedal tray

· Shifter profile mounting point

· Rubber dampers

· Mounting brackets

· Black bolts. Nuts and t-nuts with ball spring

· End caps for all visible profiles, cover caps for all visible nuts

· English step-by-step building instructions.

What is optional:

· SimXPro® Universal seat brackets

· SimXPro® Extended universal seat brackets

T-nuts and slides:

Our profiles have slots all around. Where possible, we have provided our brackets with slides instead of holes. This means you are not stuck with one fixed setup and you can adjust everything to your own preferences.

Assembling the XT160:

The XT160 must be assembled with 2 people. The XT160 is not very difficult to assemble. The mounting instructions are clear. Because there are so many possibilities with our system, a little technical insight is needed. The most important thing to prevent flex is to tighten everything properly.

SimXPro® XT160 - Silver
î şî şî şî şî ş (0)
Sur commande
SimXPro® XT160 - Silver

SimXPro® XT160 - Silver

î şî şî şî şî ş (0)
€ 749,00

SimXPro® XT160 - Silver

The XT160 is the best choice for the sim racer who wants to get the most out of there rigs in terms of strength and adjustability. Expanding and upgrading is very easy because all our parts can be used with all our profiles. You are not tied to one model or a fixed setup. The XT160 is our high end top model with shifter mount and (front) wheel mount of choice. You can also choose if you want to have the uprights connected with our steel corner brackets our Aluminium T-connect plates. The XT160 can hold the forces of every Direct Drive and motion set.

Base frame dimensions: Ca. 1350x660x820mm

Weight: ca. 60kg

Basic package contains (without options)

2x 1300 mm - 40160 profiles

2x 500 mm - 40160 profiles

2x 800 mm - 40120 profiles

1x 580 mm - 4080 profile

2x 500 mm - 4040 profiles

1x 340 mm - 4040 profile

*Profiles for shifter mounting point included.

**Extended profile pedal deck is included.

What is included:

· SimXPro® Flat or front wheel mount

· SimXPro® Adjustable feet brackets

· SimXPro® Extended pedal tray

· Shifter profile mounting point

· Rubber dampers

· Mounting brackets

· Black bolts. Nuts and t-nuts with ball spring

· End caps for all visible profiles, cover caps for all visible nuts

· English step-by-step building instructions.

What is optional:

· SimXPro® Universal seat brackets

· SimXPro® Extended universal seat brackets

T-nuts and slides:

Our profiles have slots all around. Where possible, we have provided our brackets with slides instead of holes. This means you are not stuck with one fixed setup and you can adjust everything to your own preferences.

Assembling the XT160:

The XT160 must be assembled with 2 people. The XT160 is not very difficult to assemble. The mounting instructions are clear. Because there are so many possibilities with our system, a little technical insight is needed. The most important thing to prevent flex is to tighten everything properly.

SimXPro® GT-RS®
î şî şî şî şî ş (0)
Sur commande
SimXPro® GT-RS®

SimXPro® GT-RS®

î şî şî şî şî ş (0)
€ 399,00

SimXPro® GT-RS

This brand new SimXPro® GT-RS® is built to last and evolve with the industry standards.
Over 10 years of Sim Racing experience combined in one Eco-system with the use of the best premium grade aluminum and hardened steel brackets.

This Cockpit can easily hold any Direct Drive Wheelbase and every loadcell or even hydraulic pedal set.
Quality has not been compromised for this new benchmark in Sim-racing. The SimXPro® GT-RS® Eco-system is ensuring durability and stability even during intense racing sessions.

Purchasing the SimXPro GT-RS means investing in a long-term solution for your Sim Racing adventure. No need to constantly make upgrades or worry about compatibility with new products. The track is waiting for you, get ready to start your flex free Sim Racing Adventure with the new GT-RS® and elevate your Sim Racing experience to the next level.

The future of Sim Racing starts here.

VERSIONS AND UPGRADES:
 

MONITOR MOUNTING:

Single integrated monitor mount*:

Brackets: VESA brackets with tilt and slide option for easier adjustment.

Compatible with 75x75 and 100x100 mm VESA pattern monitors up to 45 inch with normal aspect ratio or with 49 inch wide aspect ratio.

Triple integrated monitor mount*:

Brackets: VESA brackets with tilt and slide option for easier adjustment. 

Compatible with: 75x75 and 100x100 VESA patterns for monitors up to 27 inch with normal aspect ratio or with 31 inch wide aspect ratio.

*Not compatible with monitors with other VESA patterns then 75x75 or 100x100


WHEELS:

75MM Black wheels with brakes.

Fully adjustable to get the best sim racing experience!

  • Dedicated GT Cockpit with the most authentic and adjustable driving position.
  • Powder coated finished aluminum profiles with channels for limitless adjustment
  • Adjustable in height width and angle.
  • Compatible with all seats using a mounting pattern up to LxB 420x420 mm
  • Expendable Eco-system with seats, monitor mounting and wheels options.
  • High precision laser-cutted hardened steel brackets and mounting patterns.
  • Gear shifter and handbrake support profile
  • Extra reinforced mounting system for wheelbases up to 25NM
  • SimXPro® accessories mounting kit with a variety of brackets, bolts, nuts and t-nuts to mount most types of wheelbases, pedals, seat and/or accessories
  • The most compact solution also for the sim-racer with limited space.
  • Due to the almost limitless adjustability of the GT-RS, this cockpit is suitable for people between 1.10m and 2.0m.
  • Baseframe dimensions depending on your configuration but approximately (lxbxh)125x50x62cm
  • Compatible with all major hardware brands for wheelbases, pedalsets, seats and accessories 
 

EASE OF ASSEMBLY

Well thought out design which results easier assembly. Ready to race quicker then any other cockpit in the market due to the step by step video instructions. All parts are individually packed to be protected in transport and to ensure easy assembly. With the included spare materials and accessories kit you will usually have enough bolts and nuts to mount the most common wheelbases, pedal sets, seat and accessories.

EXPAND YOUR GT-RS ECOSYSTEM

SimXPro® GT-RS® is available with an online configurator which will allow you to create the ultimate sim-racing setup. All upgrades are available separately as well. The GT-RS is the center of a constantly growing ecosystem with accessories and mounting brackets to ensure the ultimate sim-racing experience.

WHAT’S IN THE "BASE ONLY" VERSION

  • SimXPro® GT-RS Baseframe
  • SimXPro® GT-RS Backplate
  • SimXPro® GT-RS Wheeldeck
  • SimXPro® GT-RS Front wing
  • SimXPro® GT-RS Side support brackets
  • SimXPro® GT-RS Profile pedal deck side plates
  • SimXPro® GT-RS Stickerset
  • SimXPro® GT-RS Mounting kits
  • SimXPro® Filt Set
  • SimXPro® End Caps
  • Gear shifter and hand brake support profile
  • Step by step detailed video instructions and manual (www.simxpro.shop/gtrs-video)

SimXPro® Single screen stand tiltable - VESA 75-100-200-400
î şî şî şî şî ş (0)
Sur commande
SimXPro® Single screen stand tiltable - VESA 75-100-200-400

SimXPro® Single screen stand tiltable - VESA 75-100-200-400

î şî şî şî şî ş (0)
€ 199,00

SimXPro® Single screen stand tiltable - VESA 75-100-200-400

Material: 4040 and 4080 aluminium profiles and 2 and 3 mm hard steel brackets.
Finishing: The VESA brackets are brake pressed for extra strength and adjustment.
Color: Grey anodized or black powder coating (option)

Included:
- Aluminium profiles:
2x 120 cm - 4040
1x 100 or 84 cm cm - 4080
2x 50 cm - 4040

- VESA brackets (choose yours in options)
- 4040 and 4080 corner brackets
- End caps
- Bolts and T-nuts
- Building instructions (English)

Not included: VESA Bolts (optional), spacers

Dimensions LxWxH (mm): 580x1000x1240
Weight (kg): 14
Adjustable: Yes. Height, width, screen tilt (with the 100/200 VESA brackets)

Specifications
Compatible with: 75/100/200 VESA mount monitors up to 60 inch

Pros and cons:
+ Were other stand usually don't have tiltable options we provide you with special brackets that improve your FOV
+ Solid screen stand for a steady screen setup
+ VESA Mounts for 75/100 & 100/200 both included
+ The 100/200 VESA mount is tiltable forward and backward

- No tilt forward and backward with the VESA 75 bracket but this can be done slightly with tilting the middle profile

SimXPro® Light Triple screen setup VESA 75-100
î şî şî şî şî ş (0)
Sur commande
SimXPro® Light Triple screen setup VESA 75-100

SimXPro® Light Triple screen setup VESA 75-100

î şî şî şî şî ş (0)
€ 249,00

SimXPro® Light Triple screen setup VESA 75-100

Material: 4040 and 4080 aluminium profiles and 2 and 3 mm hardened steel brackets.
Finishing: VESA brackets are brake pressed for extra strength and adjustment.
Color: Grey anodized with black brackets or full black powder coating (option)

Included:
- Aluminium profiles:
2x 120cm - 4080
1x 120 cm - 4040
4x 50 cm - 4040

- VESA brackets (choose yours in options)
- 4x Triple connector brackets
- 4040 and 4080 corner brackets
- End caps
- Bolts and T-nuts
- Building instructions (English)

Dimensions up to LxWxH (mm): 500x 1200 up to 2000 x1240
Weight (kg): 16
Adjustable: Yes. Height, width, screen tilt, screen angle

Specifications
Compatible with: 75x75 and 100x100 VESA patterns for monitors up to 27 inch with normal aspect ratio or with 31 inch wide aspect

Not compatible with: Monitors with other VESA patterns

Not included: TV-Screen / monitor

Pros and cons:
+ Perfect alignment of your triple screen setup due to our special tilt/angle 75/100 VESA Brackets (select in options)
+ Were other stand usually don't have tiltable options we provide you with special brackets that reach perfect FOV's
+ Solid screen stand for a steady triple screen setup

- Will not fit with 200/400 VESA. Also for heavy and 27+ inch monitors we recommend the HEAVY triple screen setup.

SimXPro® HEAVY Triple screen setup VESA (75-) 100-200
î şî şî şî şî ş (0)
Sur commande
SimXPro® HEAVY Triple screen setup VESA (75-) 100-200

SimXPro® HEAVY Triple screen setup VESA (75-) 100-200

î şî şî şî şî ş (0)
€ 309,00

SimXPro® HEAVY Triple screen setup VESA (75-) 100-200

Material: 4080 aluminium profiles and 2 and 3 mm hardened steel brackets.
Finishing: VESA brackets are brake pressed for extra strength and adjustment.
Color: Grey anodized with black brackets or full black powder coating (option)

Included:
- Aluminium profiles:
3x 120cm - 4080
2x 58 cm - 4080
2x 58 cm - 4040

- SimXPro® Standard 75/100 VESA or Tiltable 100/200 VESA brackets (options)
- 4x Triple connector brackets
- 4040 and 4080 corner brackets
- End caps
- Bolts and T-nuts
- Building instructions (English)

Dimensions up to LxWxH (mm): 580x 1200 up to 2360 x1240
Weight (kg): 25
Adjustable: Yes. Height, width, screen tilt, screen angle

Specifications
Compatible with: 75x75, 100x100 or 200x200 VESA patterns depending on the option you select. Mount monitors up to 35 inch with normal aspect ratio or with 43 inch wide aspect.
Not included: TV-Screen / monitor, XT160 Cockpit, Sparco Seat


Pros and cons:
+ Perfect alignment of your triple screen setup due to our special tilt/angle 100/200 VESA brackets
+ Were other stands usually don't have tiltable options we provide you with special brackets that reach perfect FOV's
+ Solid screen stand for a steady triple screen setup

- Does not fit 100x200 mm pattern and 400x400 mm VESA monitors